No tutorial for version 1.9 . Using the latest version
GzWeb is usually installed on an Ubuntu server. Once the server is set up and running, clients can interact with the simulation simply by accessing the server's URL on a web browser.
The main dependencies for GzWeb are the Gazebo development libraries, version 7 or greater, and NodeJS version 4 up to version 8.
Take a look at these tutorials to choose the Gazebo installation that best fits your case. The simplest approach would be to install Gazebo 7 as follows:
sudo apt install gazebo7 libgazebo7-dev
Run the following to install the rest of dependencies, including NodeJS:
sudo apt install libjansson-dev nodejs npm nodejs-legacy libboost-dev imagemagick libtinyxml-dev mercurial cmake build-essential
Ubuntu Trusty comes with NodeJS 0.10. You can follow these instructions to upgrade the Node version.
Clone the repository into a directory in your home folder for example:
cd ~; git clone https://github.com/osrf/gzweb
Enter the GzWeb repository and switch to the 1.4.0 release branch:
cd ~/gzweb git checkout gzweb_1.4.0
The first time you build, you'll need to gather all the Gazebo models which you want to simulate in the right directory ('http/client/assets') and prepare them for the web.
Before running the deploy script, it's important to source the Gazebo
If you installed gazebo via deb packages:
If you did a source install then:
Run the deploy script, this downloads models from the web and may take a couple of minutes, see more options below.
npm run deploy --- -m
-mflag tells the deploy script to grab all the models from the model database and any other models in your
GAZEBO_MODEL_PATH. For all subsequent builds, the
-mflag will not be needed.
To skip downloading models from the model database and grab only local models in your Gazebo model path, do:
npm run deploy --- -m local
To generate thumbnails for all the models , run the script with the
-t flag, i.e.:
npm run deploy --- -t
Note: This spins up a
gzserverwith a camera for capturing screenshots of models. So make sure there is rendering support and no background gzerver process running (or set a different
GAZEBO_MASTER_URIin the terminal).
If you'll use GzWeb on mobile devices, you can create coarse versions of all
models, which are lighter to load (50% of original quality). If generated,
these meshes will automatically be used on mobile devices. If you've already
npm run deploy --- -m, run just:
npm run deploy --- -c
Or you can run both flags at the same time to generate coarse versions as you create the database:
npm run deploy --- -m -c
You also have the option to pick specific models and how much percent to coarsen, running:
./coarse_meshes.sh [percent] [path]
[percent] is the edges ratio with respect to the original mesh
(0 to 100), and
[path] is the path of a model. For example:
./coarse_meshes.sh 20 http/client/assets/bowl/
Running GzWeb involves the following pieces:
gzserver running the headless Gazebo simulation (runs by default on
GzWeb's NodeJS server which communicates with
A Websocket server which forwards simulation updates coming from
to the browser
A browser client which connects to the HTTP and websocket servers
Start them as follows:
On the server machine, start
gzserver first, it's recommended
to run in verbose mode so you see debug messages:
Tip: see the port where the Gazebo master is communicating, such as
[Msg] Connected to gazebo master @ http://127.0.0.1:11345
On another terminal, from your GzWeb directory, run the following command to start both the HTTP and Websocket servers:
Tip: You can use the
-poption to choose an arbitrary port, for example:
npm start -p 1234. By default, it serves on port 8080.
Open a browser that has WebGL and websocket support (i.e. most modern browsers) and point it to the IP address and port where the HTTP server is started, for example:
gzserver or the GzWeb servers, just press
Ctrl+C in their terminals.
Q: When installing node package modules, I see errors along the lines of:
npm ERR! Error: failed to fetch from registry: node-gyp
A: Try setting the npm registry first then install the modules again.
npm config set registry http://registry.npmjs.org/
Q: When installing websocket, I see errors along the lines of:
sh: 1: node: not found npm ERR! error installing firstname.lastname@example.org npm WARN This failure might be due to the use of legacy binary "node"
Or along the lines of:
/usr/bin/env: node: No such file or directory There are node-gyp build errors, exiting.
A: In Debian systems, the binary file "node" has been renamed to "nodejs" to avoid a name conflict. Try adding a symlink to the correct name:
sudo ln -s /usr/bin/nodejs /usr/bin/node
You may also find that your repository is too old and you should just install recent versions of node and npm directly.
Q: When running
npm run deploy ---, I see errors along the lines of:
gyp ERR! configure error
A: There might be a conflict between the gyp version installed and the gyp version in node-gyp. Try removing gyp:
sudo apt-get remove gyp
Q: When running
npm run deploy ---, I have problems finding GTS, like this:
~/gzweb/tools/gzcoarse.cc:18:17: fatal error: gts.h : no such file or directory, #include <gts.h>
A: It seems that your Gazebo installation didn't install GTS headers. Try installing them manually:
sudo apt-get install libgts-dev