Gazebo Release Instructions#

Initial setup#

A small number of configurations and credentials need to be made on the developer’s system before triggering the release. If a permanent operating system is used for releasing, these installation steps only need to be executed once.

1. Software and configurations#

Triggering the releasing process is only supported on Linux at this moment.

The tool designed to facilitate the process of releasing software for all platforms is called release.py, and is hosted at gazebo-tooling/release-tools. Cloning the release-tools repository is required to perform a new release:

cd ~/
git clone https://github.com/gazebo-tooling/release-tools.git

Some Debian tools require the following variables to be set:

export DEBEMAIL="<username>@openrobotics.org"
export DEBFULLNAME="<Your full name>"

Note: the two above exported variables can be added to .bashrc to have them configured automatically on every run.

2. Access and Credentials#

Before starting the release process, make sure to ask for write access to:

  1. The Gz library intended to be released and

  2. gazebo-release repository.

There are some credentials needed to interact with the release process:

  • Release token: magic sequence of characters needed while running release.py to interact with build.osrfoundation.org. This should be given to Gz developers that run releases by the Infra team.

For Each Release#

1. Team and development checks#

When creating a new release, there are some guidelines to follow before starting the process:

  • Ask the team if there are any concerns about making the release.

  • Check if there are changes to previous library versions that need to be forward-ported.

  • See if there are open PRs against the release branch (release branch is the one with the name ign/gz-fooX where foo is the name of the Gz library and X the major version of the version bump planned) that could go into the new release.

2. Update code version and changelogs#

The first step to get a new release ready is to update the current code (upstream) version (view the versioning section for more information). This bump could be in the major number (non-compatible changes), minor number (new features), patch number (patches and bugfixes).

Bumping major number of the version implies some work to have the metadata updated correctly. There is a dedicated document that you should go through before continuing to work through the steps in this document.

  1. To update the upstream version a local checkout of the Gz library is needed. A new branch is required to submit changes:

    # version X.Y.Z
    git checkout -b bump_to_X_Y_Z
    
  2. The current upstream version can be found in CMakeLists.txt file following the CMake project declaration:

    # Gz library named foo and version X.Y.Z
    project(gz-fooX VERSION X.Y.Z)
    

    Stable releases can modify the X, Y or Z directly while prereleases will need to include the preX (X number starts with 1) suffix in the gz_configure_project:

    # first prerelease of a serie, number 1
    gz_configure_project(VERSION_SUFFIX pre1)
    
  3. Together with bumping the version number, updating the Changelog and Migration documents is required. For updating the Changelog.md file, the script source_changelog.bash can be useful:

    cd <path to source code>
    bash <path to release-tools>/source-repo-scripts/source_changelog.bash <previous tag>
    # e.g. bash ../release-tools/source-repo-scripts/source_changelog.bash 3.5.0
    

The Migration.md document needs to be updated if some breaking changes are in the Changelog.

  1. Open a pull request for reviewing (example PR). When opening a PR look for the “Release” section in the template and follow the instructions there.

3. Update packages version#

Once the PR for bumping the code version is merged, the binary packages version needs to be updated for the Debian/Ubuntu packages. Brew metadata will be updated by the building server when creating the binary packages (known as bottles).

The version in the packages (binary version) should be similar to the one updated in the code in the step above but usually has some other components that reflect the package metadata version (i.e: new code version 2.1.0, new version in Debian packages is usually 2.1.0-1).

There should be a repository matching the name and major version of Gz library that you want to bump in the gz-release GitHub organization. (see release repositories document for more information about how they are used).

  1. It is required to clone the corresponding release repository to update the binary version:

    # Gz library named foo and major version X
    git clone https://github.com/gazebo-release/gz-fooX-release
    
  2. To bump the package versions that will appear in Debian/Ubuntu binary packages there is a helper script in release-tools (see initial setup). The script is called changelog_spawn.sh and require to be executed while the active directory is a release repository:

    # Gz library named foo and major version X
    cd gz-fooX-release
    ~/release-tools/release-repo-scripts/changelog_spawn.sh X.Y.Z-R
    
    # Example gz-cmake3 bumped from 3.0.0 to 3.0.1
    cd gz-cmake3-release
    ~/release-tools/release-repo-scripts/changelog_spawn.sh 3.0.1-1
    

changelog_spawn.sh will display information about the Ubuntu/Debian versions being updated as well as a git diff before uploading information to the GitHub release repository.

Triggering the release#

After updating the code and releasing metadata everything is ready to launch the build in the server. Now, the following needs to happen:

  1. Tag the corresponding code in the repository and upload that tag to GitHub.

  2. Request build.osrfoundation.org server to start a chain of job by calling gz-fooX-source.

    1. gz-fooX-source will generate the source tarball and call repository_uploader_packages to upload it to

    2. gz-fooX-source will call _releasepy that will generate the builders jobs:

      1. Debian/Ubuntu: use ign/gz-fooX-debbuilder job names

      2. Brew: entry job is generic-release-homebrew_pull_request_updater

The release.py script and Jenkins will perform all these actions. For more information of all the processes triggered by the release.py script please check the release process.

4. Executing release.py#

Make sure you are in the source code repository before running release.py. You should be on the branch to be released, after the pull request bumping the version has been merged (run git status to check the branch, and git     log to check that the version bump pull request has been included). Running release.py from the source code repository will generate and upload some Git tags (“release tags”) to the source code repository.

You will also need the token described in the credentials section.

dry-run simulation mode

The release.py tool supports a --dry-run flag that allows users to simulate releases (nothing is modified) in order to ensure that the correct arguments are being used to trigger a particular release. Gz releasers should always call release.py with --dry-run first in order to ensure that proper commands are being used to trigger releases.

The script needs to be run from the repository with the source code (i.e., the repository where the Gz library version bump pull request took place):

# Example of dry-run for gz-cmake3 bumped to 3.0.1
cd gz-cmake3
git checkout gz-cmake3
~/release-tools/release.py gz-cmake3 3.0.1 dry-run-fake-token --dry-run

release.py for stable releases

# Gz library named foo and major version X
cd ign/gz-fooX
git checkout ign/gz-fooX

# Example gz-cmake3 bumped to 3.0.1 with jenkins_token credential
cd gz-cmake3
git checkout gz-cmake3
# please replace <jenkins_token> with real release token (check crendentials section)
~/release-tools/release.py gz-cmake3 3.0.1 <jenkins_token>

release.py for prereleases or nightlies

When releasing prereleases or nightly releases, there are some special flags to be set. The --upload-to-repo argument is mandatory when running release.py, and should be set to prerelease or nightly.

# Example gz-cmake3 bumped to prerelease 3.0.0~pre1 with jenkins_token credential
cd gz-cmake3
git checkout gz-cmake3
# please replace <jenkins_token> with real release token (check crendentials section)
~/release-tools/release.py gz-cmake3 3.0.0~pre1 <jenkins_token> --upload-to-repo prerelease

Nightly invocation is generally coded in the server. The version will be taken from the last changelog entry and modified during building. No source code will be uploaded, but taken directly in the binary build from the branch pointed by --nightly-src-branch.

# Example gz-cmake3 nightly from main branch with jenkins_token credential
# please replace <jenkins_token> with real release token (check crendentials section)
~/release-tools/release.py gz-cmake3 3.0.0~pre1 <jenkins_token> --upload-to-repo nightly --nightly-src-branch main

Binary version schema for prereleases and nightlies

Prerelease and nightlies binary versions use particular naming schema to define right ordering for package managers. This information about versioning in Gazebo Classic applies to the [Gazebo] too.

release.py for revision bumps

Bumping the revision number for binary packages is a special case of releasing since the original tarball with the source code will remain the same. Once the release repository is ready with the new release version, release.py needs the --only-bump-revision-linux flag.

Note that the --source-tarball-uri parameter is needed with the original tarball of the software version. All the tarballs can be found at https://classic.gazebosim.org/distributions or the information should appear in the parameters of the Jenkins -debbuilder build that created the first version of the sofware.

# Example gz-cmake3 bumped from 3.0.1-1 to 3.0.1-2 with jenkins_token credential
# please replace <jenkins_token> with real release token (check crendentials section)
~/release-tools/release.py gz-cmake3 3.0.1 <jenkins_token> --source-tarball-uri https://osrf-distributions.s3.amazonaws.com/gz-cmake/releases/gz-cmake-3.0.1.tar.bz2 --only-bump-revision-linux -release-version 2

Checking the Building Process#

For checking that the build process is ongoing as expected:

  1. Checking the source generation and upload:

    1. The gz-fooX-source job (change fooX by the software name being released, i.e: math7) is triggered directly by release.py (script output will point to it) should have finished successfully.

    2. The gz-fooX-source job launches a one new build in the repository_uploader_packages job with the name of the software.

      1. If there is a failure, contact with the Infra team.

    3. There should be one new build in the _releasepy job with the name of the software.

      1. If there is a failure, you can check the output if you can access to the job workspace in the Jenkins build, since it is disabled by default. Contact with the Infra team for help.

  2. Checking package generation after the _releasepy build:

    1. Several -debbuilder jobs should be in https://build.osrfoundation.org/. For watching the jobs to see if any of them fail or are marked unstable, open the page for a specific debbuild, such as https://build.osrfoundation.org/job/gz-math7-debbuilder/.

      1. If there is a failure, check the list of supported architectures in the corresponding Gazebo Platform Support issue

      2. To check if a debbuild has previously succeeded for a given architecture, check packages.osrfoundation.org to see the most recent successful builds. (i.e most recent Ubuntu builds of ignition-gazebo6 or the Debian builds of ignition-gazebo6.

      3. If the failure is on a supported architecture, check the source repository for an existing report of this failure and if none exists, report the failure (see gazebosim/gz-math#161 for an example).

      4. If a build is unstable, check if it was unstable before this release and if it has already been reported. A common cause of unstable debbuilds is newly installed files that are not captured by the patterns in the .install files in the -release repository. This can be checked by searching for dh_missing in the console log of the unstable build and looking for a list of uninstalled files. Example pull requests that fix problems with dh_missing are gazebo-release/gz-transport11-release#4 and gazebo-release/gz-tools-release#4.

    2. A pull request was opened to osrf/homebrew-simulation

      1. This pull request may take a minute or two to open.

      2. Once it is open, make a comment containing the text “build bottle”. For further details, see the README at osrf/homebrew-simulation.