Profiler

Next Tutorial: Hardware-accelerated Video Encoding

Overview

This tutorial describes how to get started using the Ignition Common profiler to measure and visualize run-time performance of your software.

The gz::common::Profiler provides a common interface that can allow for multiple underlying profiler implementations. Currently, the only available implementation is Remotery.

The goal of the profiler is to provide introspection and analysis when enabled at compile time, but to introduce no overhead when it is disabled at compile-time.

To control if the profiler is enabled, set the IGN_PROFILER_ENABLE flag using cmake on the targets or sources that you are interested in (described below).

Enabling the Profiler

On custom example

In order to use the profiler, inspection points must be added to the source code, and the application or library must be linked to the ignition-common::profiler component.

To start, download the profiler.cc example.

The relevant corresponding C++ would be as follows:

// Add the profiler header
#include <gz/common/Profiler.hh>
 
...
void thread(const char *_thread_name)
{
  // Sets the name of the thread to appear in the UI
  IGN_PROFILE_THREAD_NAME(_thread_name);
  while (running)
  {
    // Add a profiling point to this scope.
    IGN_PROFILE("Loop");
    // Execute some arbitrary tasks
    for (size_t ii = 0; ii < 10; ++ii)
    {
      task1();
    }
    task2();
    task3();
  }
}

Update your CMakeLists.txt to the following. Note that the profiler must be enabled at compile time in order to function.

cmake_minimum_required(VERSION 2.8 FATAL_ERROR)
 
# Find the ignition-common library
find_package(ignition-common3 QUIET REQUIRED COMPONENTS profiler)
 
add_executable(profiler_example profiler.cc)
target_link_libraries(profiler_example ignition-common3::profiler)
# Enable the profiler for the example
target_compile_definitions(profiler_example PUBLIC "IGN_PROFILER_ENABLE=1")

Run cmake and build the example

cd build
cmake ..
make profiler_example

Then execute the example and the profiler visualization:

From terminal 1:

./profiler_example

From terminal 2, open the visualizer using one of the following commands

```{.sh}

Use a launcher script (Linux and macOS)

ign_remotery_vis

Use the source path (Linux)

Substitute the path to your ign-common source checkout

xdg-open $SOURCE_DIR/ign-common/profiler/src/Remotery/vis/index.html

Use the installation path (Linux)

This may vary depending on where you have choosen to install

xdg-open /usr/share/ignition/ignition-common3/profiler_vis/index.html

Use the installation path (macOS)

open /usr/share/ignition/ignition-common3/profiler_vis/index.html

Inside a Docker container with port 8000 exposed

1. Find your container's IP with <tt>ifconfig</tt>

2. Start a basic web server:

python3 -m http.server $SOURCE_DIR/ign-common/profiler/src/Remotery/vis/index.html

3. Open URL "http://<container IP>:8000/" with a browser on the host.

### On Ignition library
 
If you want to use profiler on any other ignition library, enable the profiler at compile time with ``ENABLE_PROFILER`` cmake argument.
 
When compiling with ``CMake``:
```{.sh}
cmake .. -DENABLE_PROFILER=1

When compiling with colcon:

colcon build --cmake-args -DENABLE_PROFILER=1

Run your Ignition library then open the profiler browser using:

ign_remotery_vis

If the profiler is run successfully, you should see output in a browser. Similar to this

Troubleshoot the web viewer

If you see connection error, there are a couple of things to double check

1. Was the profiler enabled when the project you're trying to run was compiled? Note that this isn't the case if you installed Ignition libraries from binaries, for example. You need to compile the project from source with the ENABLE_PROFILER variable set.
2. Are you using the correct port number in the upper left corner Connection Addresss: ws://127.0.0.1:1500/rmt? Running ign gazebo -v 4 will show the port number in use near the top of the outputted text. The port number will be printed out if the profiler is enabled.

   [Dbg] [RemoteryProfilerImpl.cc:187] Starting ign-common profiler impl: Remotery (port: 1500)

3. Are you running the program in a separate terminal? The profiler only establishes connection if there is a program running and being actively profiled.
4. If you want to use a different port, configure the environment variable RMT_PORT by running the following in terminal, and update the web viewer port in your browser accordingly (see 2 above)

   export RMT_PORT=1500

Using the Profiler

The profiler is used through a series of macros.

The two primary ways of profiling a section of code are to either use a matched pair of IGN_PROFILE_BEGIN and IGN_PROFILE_END macros, or to use a single RAII-style macro IGN_PROFILE. The RAII style will stop measuring once the scope that the macro was invoked in is left.

Using begin/end:

// An example of using start/stop profiling.
IGN_PROFILE_BEGIN("a");
std::this_thread::sleep_for(std::chrono::milliseconds(2));
IGN_PROFILE_END();

Using RAII-style:

{
  // An example of using scope-based profiling.
  IGN_PROFILE("a");
  std::this_thread::sleep_for(std::chrono::milliseconds(2));
}

Additionally, each thread can be given a name for easy reference in the UI:

IGN_PROFILE_THREAD_NAME("main");
IGN_PROFILE_THREAD_NAME("physics");
IGN_PROFILE_THREAD_NAME("gui");

Configuring the Profiler

Specific profiler implementations may have further configuration options available.

Configuring Remotery

Remotery can additionally be configured via environment variables. Most users should not need to change these for their applications.

• RMT_PORT: Port to listen for incoming connections on.
• RMT_QUEUE_SIZE: Size of the internal message queues
• RMT_MSGS_PER_UPDATE: Upper limit on messages consumed per loop
• RMT_SLEEP_BETWEEN_UPDATES: Controls profile server update rate.

These directly set the corresponding parameters in the rmtSettings structure. For more information, consult the Remotery source